Products >> LED Aviation obstruction lights >> 

  • LED aviation obstruction lights low intensity EuroLight
  • LED aviation obstruction lights low intensity EuroLight
LED aviation obstruction lights low intensity EuroLight LED aviation obstruction lights low intensity EuroLight

LED aviation obstruction lights low intensity EuroLight

GR-LI/B Low-intensity Single LED Aviation Obstruction Light,Base with high intensity aviation aluminum casting, fully sealed structure; Light source adopt with independent research and development dedicated LED chip, which have the specific of low power consumption and long long life; Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with Strong lightning protection and With the surge protection device, which can adopt to extremity bad working environment. This lamp with photoswich, it can turn on when light intensity less than 50LUX, and turn off when above 50Lux

Dimension drawing
dimension drawing of led aviation obstruction lights


FAA Classify:L-810
Power Supply Optional voltage:AC220V, AC120V, DC12V,DC24V,DC48V
Supply Frequency:50HZ~60HZ
Power Consumption: ≤3W
Working Mode Adjustable choice: steady-burning/flashing 20times/min
Light Intensity Type: B ≥32.5cd    Type A≥10cd
Horizontal Out-put :360°
Vertical Divergence :10°
Light Source Service Life:  ≥20 years
Emitting Color :Red 
Overall Size: 136mm×136mm×220mm
Installation Size : 3/4inches or 1 inch
IP Protection : IP65
Optical Ambient Brightness  : 50/100Lux
Ambient Temperature: -40℃~70℃
Weight  :1kg
Anti-wind Ability:120m/s

Adopts Fresnel lens PC lamp shade , emmitting angle follow the standard of FAA
With automatically light control function that can change to working mode at rainy day and night.
LED light source, its service life can up to 100000hours.
Low voltage design, high safety degree for using.
Possess ability of anti-shock, light fastness, anti rain and snow. 
With anti-surge protection function.
Possess lightning protection function.
It can be added warning function at dry contact.
It contains switch for changing flashing light and steady light.
No radio frequency (rf), no electromagnetic interference.

Usage notice
Check whether the supply voltage does comply with the rated voltage of device.
Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure. 
After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened. 
Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.

High Mast lamp
Towers(Telecom, GSM, Electric)
High-rise Buildings

Contact Us

Tel: 86-755-29512566

Fax: 86-755-29512566


Add: 5F,building D1, Xinshidaigongrong industrial park,Shihuan Road,Shiyan Town,Shenzhen City